Here are 20 step by step tips and ideas to help you create the warehouse you need at a price you can justify. From industrial tents which retract, through to portal frame structures with loading docks and conveyors to fully equipped and racked out facilities. This is the place to start your successful design and build warehouse project. Building a warehouse that works for you requires thought and experience for the best results. There are huge choices in warehouse design and construction with a range of models and equipment, one of which will be right for you. This step by step outline guide will alert you to some of the fundamentals to ensure you manage your warehouse project effectively right from the first step you take.
10 warehouse disasters to avoid
- Plan: The Professionals will keep you right? – Wrong, wrong, wrong! The professionals are not here to keep you right, they are here to carry out instructions and to take instructions – your instructions and then follow procedures that they have learned. Rule 1 know what you want or take warehouse design architect Georgia USA what you are given.
- Read the small Print: Just because it is concrete it does not mean it is load bearing. Beware of clauses that state that it is up to you to ensure your structures are suitable for the installation. That means if it fails it is your fault. They mean it!
- Know the Regulations: You are very unlikely to be able to see your foundations. If you think you can you are probably looking at a floor. A concrete floor is about 250mm thick, it is the ground bearing pressure that makes the difference. You won’t get this information by guessing but you will be required to account for it.
- Ignorance is Expensive: A foundation is up to 300mm below the floor, usually at the base of a major load bearing member like the frame of a building. They are up to 1500mm cubed and weigh over 1000kgs each, for an average warehouse.
- Don’t make Assumptions: Don’t presume that because it is a big steel column or quarter of a meter of concrete that it will take anything you want to hang or stand on it, it won’t. So don’t have afterthoughts about suspended gas fired heaters, cranes or mezzanine floors – after thoughts are expensive. Remember people who quote will normally put the lowest price in to get the work, with a specification that matches. The only thing you can safely assume is if it is not specifically mentioned it is specifically excluded. You should assume architects will have very limited knowledge of technical equipment, they are good with materials and creating attractive space, they don’t spend 10 years qualifying to design a standard portal frame building, but they will make it look a little more pleasing on the eye and design fish ponds in the reception or decide to route assembly conveyors through the administration offices, they are full of creative ideas (BMW)!
- Understand the People Limitations: Be sure you know what you are going to put in this building. You may not need an architect at all, a structural engineer will provide the right materials and advice to achieve the creation, a builder will erect it and none of these people are specialists in industrial applications. They are specialists in only their respective work. You need a materials handling engineer or a specialist in your industry, or both. In other words pick an appropriate project leader.